Connecting to Tailscale
Introduction
Many services I run require a safe and secure connection between you, the user,you and the server running the service. To facilitate this, I use a great piece of software called Tailscale.
It allows our devices to connect via the the internet, even if we are physically far apart, and even if services are running inside an isolated machine on my or your home network.
Check if you have Tailscale
If your device is running Windows, you can check your taskbar tray to see if Tailscale is already running.
Do you see the above icon in your taskbar? Then continue to
Installing Tailscale
If you do not already have Tailscale installed, head over to the Tailscale download page and follow the instructions: https://tailscale.com/download
Log in to Tailscale
You do not need an account. You will be connecting to my tailnet using an authentication key.
1. Get an authentication key
A Tailscale authentication key looks like this:
tskey-auth-k5MukmtKx621CNTRL-Te6eVCugAb9gdj27hJqYY9RNRdRcQcN1If I have not already provided you with an authentication key, contact me.
2. Open a command prompt or terminal
Open the Windows search menu and type in: cmd
Then, click Open:
You should now see a window that looks like this (minus the red bar):
3. Login and launch Tailscale
Now that you have the command prompt open, type the following:
tailscale up --auth-key PUTTHEKEYHERETip: You can right-click the window to paste from your clipboard. Use this to paste the authentication key.
To illustrate, an example using the authentication key from earlier:
tailscale up --auth-key tskey-auth-k5MukmtKx621CNTRL-Te6eVCugAb9gdj27hJqYY9RNRdRcQcN1If all goes well, you should see basically no output:
You can check if it worked by typing tailscale status. If you see a list of IP addresses and device names, you are connected!
Conclusion
Good work! You are now connected to my Tailnet. This will allow you to access all services I've given you access to.
You can continue to the next guide: Add a network drive